# PTFE SS304 Braided Hose Manufacturer India | AFPL

> Smooth-bore PTFE inner with SS304 wire braid — high-pressure, chemically inert, and suitable for the most demanding industrial environments.

Source: https://aftubes.com/ptfe-braided-ss304-hose/

---

PTFE Hose Specialist · Advanced Fluro Private Limited · SAE 100R14 Type A

## PTFE SS304 Braided Hose

Smooth-bore PTFE inner with SS304 wire braid — high-pressure, chemically inert, and suitable for the most demanding industrial environments.

[WhatsApp](https://wa.me/919699055600)[Request Quote](https://aftubes.com/contact)

[Home](https://aftubes.com/)›[PTFE Hose](https://aftubes.com/ptfe-hose)›PTFE SS304 Braided Hose

Heat & Cold Resistance

Full PTFE temperature range — compatible with live steam and cryogenic fluids. No degradation at temperature extremes.

Corrosion Resistance

Inert to virtually all acids, bases, solvents, and aggressive chemicals. The PTFE liner will not corrode or degrade.

Non-Toxic & High Purity

FDA 21 CFR 177.1550 compliant inner liner. No extractables. Safe for pharmaceutical, food, and beverage contact.

Exceptionally Low Permeability

Smooth PTFE bore prevents fluid absorption and gas permeation — critical in high-purity and hazardous fluid transfer.

Lightweight

Significantly lighter than rigid pipe alternatives — easier handling, installation, and lower structural loading on equipment nozzles.

Easy to Sanitise & Clean

Smooth non-stick bore allows CIP and SIP sterilisation. Self-draining — no fluid retention between batches.

UV & Ozone Resistant

The SS304 braid and PTFE liner are unaffected by ultraviolet radiation and ozone exposure, ensuring long outdoor service life.

Shock Resistant

Flexible construction absorbs vibration and pressure surges — protects connected equipment and fittings from fatigue damage.

### About PTFE SS304 Braided Hose

A PTFE SS304 braided hose is a smooth-bore PTFE liner inside an outer braid of stainless steel wire: the liner carries the fluid with PTFE's chemical inertness and non-stick bore, and the braid gives it the pressure-withstanding capacity the bare liner does not have. That combination is what makes it an essential component in many critical applications. PTFE hose began in hydraulic, pneumatic and aerospace service and is rapidly becoming the standard across a far wider range of industries, because hoses and tubes made from PTFE perform brilliantly under challenging environmental and industrial conditions.

Advanced Fluro Private Limited manufactures PTFE SS304 Braided Hose to SAE 100R14 Type A (smooth bore) and EN 12092 standards. End fittings are available in SS304, SS316, and carbon steel in BSP, NPT, metric, and DIN flanged configurations. By selecting the right PTFE hose, industries can leverage PTFE's exceptional properties — resulting in better performance and a lower total cost of ownership.

Selection Guide

#### Classification of PTFE Hose

Smooth Bore vs Convoluted Bore

Smooth bore hoses have a bore size of ≤1 inch with a minimum bend radius of 12 inches. Convoluted bore hoses offer greater flexibility with a minimum bend radius of just 3 inches — suited for tight routing.

Non-Conductive vs Conductive

High-velocity flow through PTFE hoses can generate dangerous static charges. Conductive PTFE hoses are manufactured with anti-static materials to prevent static charge buildup and eliminate explosion risk.

Wall Thickness

Thicker walls provide better resistance to buckling in severe flexing applications and reduce gas permeability — at the cost of additional space. Thinner walls offer lighter, more flexible assemblies.

Braid Material

SS304 is the standard choice. SS316 is used for marine environments. Bronze braid is preferred in high-friction environments due to its lubricating properties.

Technical Data

#### Specifications & Standards

| Parameter | Value / Range |
| --- | --- |
| Standard | SAE 100R14 Type A (smooth bore) |
| Inner Liner | Virgin PTFE — smooth bore, Ra ≤ 0.4 µm |
| Braid Material | Type 304 stainless steel wire (Type 316 for marine on request) |
| Temperature Range | –65°C to +260°C continuous |
| Nominal ID Range | 3.2 mm (–3 dash) to 29 mm (–20 dash) |
| Max Working Pressure | 207 bar (–3 dash) down to 52 bar (–20 dash) |
| Burst Pressure | 4× working pressure minimum per SAE 100R14 |
| FDA Compliance | 21 CFR 177.1550 (inner tube) |
| End Fittings | SS304 / SS316 / carbon steel — BSP, NPT, DIN, flanged |
| Bore Type | Smooth (Type A) — Type B corrugated available as separate variant |

Where It's Used

#### Applications

✓Oil and gas refineries

✓Steel plants and power plants

✓Pharmaceutical and fertilizer industries

✓Chemical processing plants

✓Industrial boilers

✓Air conditioning and refrigeration

✓Nuclear installations

✓Automotive industries

✓Paper mills

✓Ports and shipyards

Technical Datasheet

Full specifications, pressure ratings & material data — sent directly to your email.

Other PTFE Hose Variants

#### Related Products

[PTFE Corrugated HoseEnhanced flexibility with 40% tighter minimum bend radius.](https://aftubes.com/ptfe-corrugated-convoluted-hose)[PTFE Yarn Braided HoseLightweight, non-conductive — suited for pharma and food.](https://aftubes.com/ptfe-fabric-braided-hose)[PTFE Conductive HoseStatic-dissipative inner for fuel and solvent transfer.](https://aftubes.com/ptfe-conductive-hose)

Quick Enquiry

WhatsApp Instead

Need technical data or a sample? Call our team directly:

+91 96990 55600

Advanced Fluro Private Limited

### Get a Quote for PTFE SS304 Braided Hose

Share your hose ID, SAE dash size, pressure, temperature, fluid, and fitting type — we respond within one business day.

[Request a Quote](https://aftubes.com/contact)[WhatsApp](https://wa.me/919699055600)