Advanced Fluoro Tubes


PTFE
Tubes


Advanced Fluoro Tubes is a PTFE Tube manufacturer and supplier. We manufacture world class PTFE tubes ranging from 0.8mm to 28 mm ID and 0.25mm to 3.5 mm wall thickness.

PTFE tubes manufactured are flexible tubes. They are manufactured in various continuous lengths from 300-20 meters. Continuos lengths depends on the OD & ID of the PTFE tube. We also manufacture long length PTFE rods or ropes with diameter 2mm-8mm. These PTFE ropes are widely used in sealing applications.
For dimension tolerances of PTFE tubes and rods please contact us.

As PTFE tube manufacturer we maintain extremly tight tolerances which eliminates leakage and/or reduces scrap.
As a leading PTFE tube supplier we ensure PTFE tubes are manufactured and delivered as per schedule.

Some applications require properties like increased abrasion resistance or self lubricating PTFE tubes. In such cases our engineers study the application and come up with solutions to meet application requirements.

For example there are many applications which require PTFE tubes to have antistatic properties. We manufacture PTFE tubes which meet this requirement.

We often get asked about how flexible the PTFE tubes are or how much pressure they can resist. If you have such queries please contact us via the contact form or send us an email.

In addition to manufacturing virgin PTFE tubes we offer services like sleeving, end flaring, specific cut lengths etc. In applications where one end of the PTFE tube / sleeve needs to be sealed, our seals have been tested to be leak proof / water tight at 15 kg/cm2 pressure during hydro testing. The quality of the seal is a result of technology developed inhouse.


Virgin PTFE tubing properties.

PROPERTY ASTM Method  
Tensile Strength, 73 degrees D638-52T 1,500 - 3,000 lb./sq.in
Elongation 73 degrees Fahrenheit D638-52T 100-200%
Hardness,  Durometer D676-49T  D50-D60
Coefficient  of linear  thermal exansion  per 73 - 100 degrees  Fahrenheit D696-44 5.5 X 10 to the -5 power
Thermal  conductivity, 0.18 in  Cenco-Fitch 1.7 B.T.U./hr./sq. ft./ degrees Fahrenheit /in.
Heat-distortion  temperature 66 lb./sq.in. D6488-45T 250 degrees Fahrenheit
Dielectric  strength, short time,  0.080 in. D149-44 400-500 v/mil
Dielectric  constant, 60 cycles -  greater then 3,000 megacycles D150-54T 2.1
Dissipation factor, 60 cycles - greater  then 3,000 D150-54T less then 0.0003
Water-absortion D570-42  less then 0.01%
Flamability D635-44 non-flamable
Specific Gravity D792-50 2.1 - 2.2
Resistance to  weathering Unaffected upto 25 yrs in temperate zones.
Static or  kinetic coefficient  0.04
Site best viewed in 1024 x 768 resolution Site Designed & developed by Webzonex